Jump to content

Fyrimynd:Infobox protected area

Frá Wikipedia, hin frælsa alfrøðin
Documentation icon Skjalfesting til fyrimyndina[vís] [rætta] [søga] [dagfør]

This template can be used to generate an infobox for a protected area. It is part of the Protected areas WikiProject.

These selected parameters can be used to form a completely functional infobox and the extra parameters listed below can also be added. This markup can be pasted into a new article. See below for working examples.

Basic usage
{{Infobox protected area
| name = 
| alt_name = 
| iucn_category = 
| photo = 
| photo_alt = 
| photo_caption = 
| photo_width = 
| map = 
| map_alt = 
| map_caption = 
| map_width = 
| relief =
| label =
| label_position =
| mark =
| marker_size =
| location = 
| nearest_city = 
| coordinates = 
| coords_ref = 
| region = 
| area = 
| designation =
| authorized =
| created =
| established = 
| designated =
| visitation_num = 
| visitation_year = 
| visitation_ref =
| governing_body = 
| administrator =
| operator =
| owner =
| world_heritage_site =
| website = 
| url = 
| child = 
| embedded = 
}}
Full code

Parameter descriptions

[rætta wikitekst]

This table describes all parameters which can be used in building infoboxes. Only the name parameter must be assigned a value.

Field name Description
name Required. The official name of the protected area. It will be displayed at the top of the infobox. In most cases this should be the same as the article name less any disambiguation. For example if the article title is Mount Washington (New Hampshire) then name=Mount Washington.
alt_name If there is a common English name for the area use for the name parameter. This parameter can be used to display the name in the local language or for an alternate English name if it is commonly used. If you would like to italicize the text use wiki markup.
iucn_category Strongly recommended. The IUCN category associated with the protected area. Valid values are Ia, Ib, II, III, IV, V, or VI. See IUCN Categories.
photo The name of an image file to be displayed. No special formatting is needed.
photo_width Can be used to change the display width the image. The default and maximum value is 284px. Images with a horizontal orientation (landscape mode) will generally display well at the default setting. An image with vertical orientation (portrait mode) may need to be adjusted to 180px or 220px. For example photo_width=200 and not photo_width=200px.
photo_alt Alt text for the photo, for visually impaired readers. See WP:ALT.
photo_caption The caption which will appear below the image if one is required.
map The name of the map to be displayed. See Map display methods.
map_width Width to display the map image in pixels. The default and maximum is 284, but usually the map should be much smaller. For example: map_width=200 (not map_width=200px). If a location map template is used the map size might be scaled automatically if no width is specified.
map_alt Alternative text for the map image, see WP:ALT.
map_caption Text to be displayed below the map image, if required.
relief When the geographical coordinates method is used (see Map display methods), any non-blank value (yes, 1, etc.) will cause the template to display a relief map image, where available. For additional information, see Template:Location map#Relief parameter.
label A text message that will be displayed next to the marker. Works with label_position below.
label_position Specifies the position of a label with respect to the marker. This is not functional when using the XY method for map display. It must be assigned a value or no label will not display. Valid values are left, right, top and bottom. See label above.
mark The image to use for the marker. The default is Red pog.svg, unless map=us locator blank.svg in which case the default is Green pog.svg. See Template:Infobox_map#Marks for more information.
marker_size The display width of the marker image in pixels. The default value is 8.
location The location of the protected area. Don't be too precise. County, state and country are good in the USA. If the area is within a city specify the city, state and country. If the area is in multiple counties just list the state and country. For areas in other countries adjust accordingly.
nearest_city
nearest_town
Recommended if the area is not within a city or town. It could be a city with a major airport or a large gateway town where supplies and lodging are available. Use the most appropriate parameter.
coordinates For the {{coord}} template. The parameters |format=dms and |display=inline,title are recommended. Its coordinates can be used with the location map. (Unless a value for type: is provided, the template will automatically use type:landmark. See the {{Coord}} page for more info.)
coords_ref Can be used with either coordinate display method above. Strongly recommended. Specify a citation for the coordinates using <ref>...</ref> tags.
x
y
Specifies the position of the location marker on a map image. The coordinates of the marker in pixels based on a map with a width of 1000 pixels. The template will scale these values for proper display. See below.
x%
y%
Specifies the position of the location marker on a map image. x% specifies the percentage of the distance across the image from the left edge and y% specifies the percentage of the distance down from the top edge. See below.
area Area of the protected area. Usually in acres or square miles for US locations and hectares or square kilometres elsewhere. The {{Convert}} template should be used. Very small areas might be specified in square feet, square yards or square metres.
designation
authorized
created
established
designated
The date the protected area was created. See below. Use {{Start date}}. For example, for Yosemite National Park, use {{Start date|1890|10|1}}.
visitation_num The number of visitors in a recent year if known.
visitation_year The year during which the number of visitors was counted.
visitation_ref Used with the visitation parameters above. Highly recommended. Specify the a citation for the visitation data using <ref>...</ref> tags.
governing_body
administrator
operator
owner
The agency or organization which controls or owns the protected area. See below.
world_heritage_site The year the protected area was designated a World Heritage Site. Few areas have this designation. If the article uses {{Infobox World Heritage Site}} then this parameter should not be used.
website The full URL of the official website with no formatting. For example: http://www.example.org/.
url Displays a url with no label.
child Set to "yes" if this infobox is embedded inside another infobox.
embedded Another infobox to place within this infobox. It will show up at the bottom. It needs to have its "embed" or "child" parameter set to 1 or yes, as appropriate.

Alternate parameters

[rætta wikitekst]

A few cells allow alternate parameter names which can be used to generate an appropriate label. Editors should probably not be overly concerned with using the correct label unless using the wrong label would be a blatant error.

Protected areas are often created as the result of a governmental procedure. For example, in the United States, national parks are established by an act of congress, National Monuments are usually created by presidential proclamation, and wilderness areas are designated by an act of congress. National Park Service Affiliated Areas are authorized.

authorized → Authorized
created → Created
designated → Designated
established → Established

Some areas are privately owned, and it might be inappropriate to use the label Governing body. For example, the Aleutian World War II National Historic Area is affiliated with the National Park Service but is owned by the Ounalashka Corporation. Chimney Rock National Historic Site is operated by Nebraska State Historical Society.

governing_body → Governing body
administrator → Administrator
operator → Operator
owner → Owner

IUCN Categories

[rætta wikitekst]

Depending on the value of the iucn_category parameter, one of the following banners will be displayed below the name. Valid values are Ia, Ib, II, III, IV, V and VI. For more information read the IUCN protected area categories article. If you cannot find the correct code in a reliable source, leave blank.

IUCN category Ib (wilderness area)
IUCN category II (national park)
IUCN category IV (habitat/species management area)
IUCN category V (protected landscape/seascape)
IUCN category VI (protected area with sustainable use of natural resources)

Coordinate syntax

[rætta wikitekst]

See Template:Infobox map/coordinate syntax.

With map only

[rætta wikitekst]
Ku-ring-gai Chase National Park
IUCN category II (national park)
Lua feilur í Module:Location_map á linju 332: No value was provided for longitude.
Location New South Wales, Australia
Nearest city Sydney
Coordinates 33°39′3.6″S 151°12′3.6″E / 33.651000°S 151.201000°E / -33.651000; 151.201000
Area 154 km2 (59 sq mi)
Established 1 oktober 1967 (1967-10-01)
Visitors 2 million (in 2001)
Governing body National Parks and Wildlife Service (New South Wales)
{{Infobox protected area
| name = Ku-ring-gai Chase National Park
| iucn_category = II
| map = Australia
| relief = yes
| map_width = 200
| map_alt = A map showing the location of the park on the east coast of Australia
| location = [[New South Wales]], Australia
| nearest_city = [[Sydney]]
| coordinates = {{coord|33|39|3.6|S|151|12|3.6|E|region:AU|display=inline}}
| area = {{convert|154|km2|abbr=on}}
| established = {{start date|1967|10|1}}
| visitation_num = 2 million
| visitation_year = 2001
| governing_body = [[National Parks and Wildlife Service (New South Wales)]]
}}

With photograph only

[rætta wikitekst]
Yosemite National Park
IUCN category II (national park)
Mountain valley with sheer cliff on its left side, and a waterfall cascading into its right, with a clear blue sky above and many green trees below
Yosemite Valley from Tunnel View
Location California, United States
Nearest city Mariposa
Coordinates 37°43′44″N 119°35′54″W / 37.72889°N 119.59833°W / 37.72889; -119.59833
Area 761.266 acres (308.073 ha)
Established 1 oktober 1890 (1890-10-01)
Visitors 3,280,911 (in 2004)
Governing body National Park Service
World Heritage Site 1984
http://www.nps.gov/yose/
{{Infobox protected area
| name = Yosemite National Park
| iucn_category = II
| photo = Tunnel View, Yosemite Valley, Yosemite NP - Diliff.jpg
| photo_alt = Mountain valley with sheer cliff on its left side, and a waterfall cascading into its right, with a clear blue sky above and many green trees below
| photo_caption = Yosemite Valley from Tunnel View
| location = [[California]], United States
| nearest_city = [[Mariposa, California|Mariposa]]
| coordinates={{coord|37|43|44|N|119|35|54|W|display = inline <!-- for documentation page only - not general practice -->}}
| scale = 300000
| area = {{convert|761266|acres|0}}
| established = {{start date|1890|10|1}}
| visitation_num = 3,280,911
| visitation_year = 2004
| governing_body = [[National Park Service]]
| world_heritage_site = 1984
| url = http://www.nps.gov/yose/
}}

With no photograph or map

[rætta wikitekst]
Harz National Park
Nationalparkverwaltung Harz
IUCN category II (national park)
Location Lower Saxony and Saxony-Anhalt, Germany
Coordinates 51°47′00″N 10°34′00″E / 51.78333°N 10.56667°E / 51.78333; 10.56667
Area 8.900 hectares (21.992 acres)
Established 1990, 1994, 2006
Governing body Nationalparkverwaltung Harz
{{Infobox protected area
| name            = Harz National Park
| alt_name        = ''Nationalparkverwaltung Harz''
| iucn_category   = II
| location        = [[Lower Saxony]] and [[Saxony-Anhalt]], Germany
| nearest_city    = 
| coordinates     = {{coord|51|47|00|N|10|34|00|E|region:DE_type:landmark|display=inline}}
| area            = {{convert|8900|ha}}
| established     = 1990, 1994, 2006
| visitation_num  = 
| visitation_year = 
| governing_body  = Nationalparkverwaltung Harz
}}

With photograph and map

[rætta wikitekst]
Dry Island Buffalo Jump Provincial Park
A green valley with a river and a road running somewhat parallel to the river
Panoramic view
Map of Alberta, Canada
Location Alberta, Canada
Nearest city Three Hills
Coordinates 51°56′10″N 112°57′41″W / 51.93611°N 112.96139°W / 51.93611; -112.96139
Area 345 km2 (133 sq mi)
Established 15 desember 1970 (1970-12-15)
Governing body Alberta Tourism, Parks and Recreation
{{Infobox protected area
| name = Dry Island Buffalo Jump Provincial Park
| photo = Dry Island Provincial Park2.jpg
| photo_alt = A green valley with a river and a road running somewhat parallel to the river
| photo_caption = Panoramic view
| photo_width = 260
| iucn_category = III
| map = Canada Alberta
| map_alt = Location the park in south central Alberta, Canada
| map_caption = Map of Alberta, Canada
| relief = yes 
| map_width = 200
| location = [[Alberta]], Canada
| nearest_city = [[Three Hills, Alberta|Three Hills]]
| coordinates     = {{coord|51|56|10|N|112|57|41|W| display = inline <!-- for documentation page only - not general practice -->}}
| coords_ref = 
| area = {{convert|34.5|km2|0|abbr=on}}
| established = {{start date|1970|12|15}}
| governing_body = [[Alberta Tourism, Parks and Recreation]]
}}

With embedded alternate map

[rætta wikitekst]
Black Forest National Park
IUCN category II (national park)
Map showing the location of Black Forest National Park
Location of the Black Forest National Park in the northwestern Black Forest
Location Baden-Württemberg, Germany
Coordinates 48°33′40″N 8°13′17″E / 48.56111°N 8.22139°E / 48.56111; 8.22139
{{Infobox protected area
| name = Black Forest National Park
| iucn_category = II
| map = Nationalpark-Schwarzwald-Lageplan.png
| map_alt = 
| map_caption = Location of the Black Forest National Park in the northwestern Black Forest
| map_width = 
| relief =
| location = [[Baden-Württemberg]], Germany
| coordinates     = {{coord|48|33|40|N|8|13|17|E| display = inline <!-- for documentation page only - not general practice -->}}
| child = {{Location map | Germany
 | AlternativeMap = Karte Nationalparks Deutschland high.png
 | caption = Black Forest National Park in the southwest of the map
 | coordinates     = {{coord|48|33|40|N|8|13|17|E}} 
 | border = none
 | width = 300
 }}
}}

Map display methods

[rætta wikitekst]

Any image of a map showing the location of the protected area can be used. There are three methods by which maps showing a marker can be generated.

Display a marker on a map using a template and geographic coordinates

[rætta wikitekst]

A marker can be superimposed on a map using one of a set of special map templates. To display a marker the geographic coordinates must be specified using the parameters lat_d, long_d, etc. See the documentation for {{Location map}}. The parameters for this template map to a subset of the parameters used by {{Location map}}. A map template can be found using these sources:

List of templates - Many of the listed items are redirects and a few templates may not function as expected.
Category:Location map templates - templates sorted by category.
Special:WhatLinksHere/Template:Location map/Info - a search that might help.
Special:Prefixindex/Template:Location map - another search that might help.

All of the names begin with the words "Location map" followed by the area covered. The value you need to specify is the area name. The map template for the Canada is Location map Canada. In this case specify map=Canada.

Four Corners, Canada
Example using geographic coordinates
{{Infobox protected area
| name = Four Corners, Canada
| map = Canada
| map_caption = Example using geographic coordinates
| lat_d = 60 | lat_m = 00 | lat_s = 00 | lat_NS = N
| long_d = 102 | long_m = 00 | long_s = 00 | long_EW = W
}}

Display a marker on any map image using the x and y parameters

[rætta wikitekst]

The values for the x and y parameters are the pixel coordinates of the location mark when the image is scaled to a width of 1000 pixels.

x is the pixel offset for the mark from the left edge of an image 1000px wide.
y is the pixel offset for the mark from the top edge of an image 1000px wide.

There are at least two ways of obtaining these values:

  1. Download the image from the image's file page to your computer. Open the image in a graphics editor, such as GIMP or XnView. Scale (resize) the image to a width of 1000px and then note the x, y coordinates when the cursor points to the desired location. Use these values directly.
  2. Download the image from the image's file page to your computer. Open the image in any image viewer that displays the coordinates of the cursor position, such as Paint from Microsoft. Note the x, y coordinates when the cursor points to the location. Then:
1000 · x'/w = x  and  1000 · y'/w = y
where x' and y' are the cursor coordinates, w is the width of the image displayed on your computer and x and y are the values to assign to the x and y parameters.
Four Corners, Canada
Map showing the location of Four Corners, Canada
Four Corners, Canada
Example using the x and y parameters
{{Infobox protected area
| name = Four Corners, Canada
| map = Canada location map.svg
| map_caption = Example using the x and y parameters
| x = 369
| y = 487
}}

Display a marker on any map image using the x% and y% parameters

[rætta wikitekst]
x% specifies the percent of the distance across the image from the left edge.
y% specifies the percent of the distance down from the top edge.

In the following example the marker is 36.9% of the way across and 57.4% of the way down.

Four Corners, Canada
Map showing the location of Four Corners, Canada
Four Corners, Canada
Example using the x% and y% parameters
{{Infobox protected area
| name = Four Corners, Canada
| map = Relief map of Canada.png
| map_caption = Example using the x% and y% parameters
| x% = 36.9
| y% = 57.4
}}

TemplateData

[rætta wikitekst]

No description.

Template parameters[Edit template data]

ParameterDescriptionTypeStatus
Namename

Name of protected area

Stringrequired
Alternative Namealt_name

Common name for the protected area

Stringoptional
IUCN Categoryiucn_category

IUCN Category associated with the protected area

Stringoptional
Photophoto

Image for the protected area

Page nameoptional
Photo Widthphoto_width

Width of the image given by photo

Numberoptional
Photo Alternative Textphoto_alt

Alternative text to be displayed if image doesn't appear for any reason

Stringoptional
Photo Captionphoto_caption

Caption for the photo

Stringoptional
Mapmap

Map for the protected area

Page nameoptional
Map Alternative Textmap_alt

Alternative text to display if the map doesn't display for whatever reasons

Stringoptional
Map Captionmap_caption

Caption for the map

Stringoptional
Map Widthmap_width

Width of the map

Numberoptional
Reliefrelief

When the geographical coordinates method is used, any non-blank value will cause the template to display a relief map image

Stringoptional
Locationlocation

Location of the protected area

Stringoptional
Nearest Citynearest_city

Nearest city from the protected area

Stringoptional
Latitude(Degrees)lat_d

Degrees of latitude of protected area

Numberoptional
Latitude(Minutes)lat_m

Minutes of latitude of protected area

Numberoptional
Latitude(Seconds)lat_s

Seconds of latitude of protected area

Numberoptional
Latitude(North/South)lat_NS

N if protected area is north of equator, S if protected area is south of equator

Stringoptional
Longitude(Degrees)long_d

Degrees of longitude of protected area

Numberoptional
Longitude(Minutes)long_m

Minutes of longitude of protected area

Numberoptional
Longitude(Seconds)long_s

Seconds of longitude of protected area

Numberoptional
Longitude(East/West)long_EW

E if protected area is East of the prime meridian, W if protected area is west of the prime meridian

Stringoptional
Coordinatescoordinates coords

When this option is used the type, region, scale, source, format and display parameters are not functional but this data can be entered in the {{Coord}} template.

Stringoptional
Coordinates Referencecoords_ref

Can be used with either coordinate display method above

Stringoptional
Typetype

Type is one way to specify the scale of maps generated by external map websites

Default
landmark
Stringoptional
Scalescale

Determines the zoom factor for external map websites.

Stringoptional
Regionregion

Country code in which the protected area is located

Stringoptional
Sourcesource

Source of the coordinate data of the protected area

Stringoptional
Formatformat

dms for degrees, minutes and seconds, and dec for decimal degrees

Default
dms
Stringoptional
Areaarea

Area Covered by protected area

Numberoptional
Displaydisplay

Determines where the coordinates will be displayed

Default
inline,title
Stringoptional
Establishedestablished

The date on which the protected area was created

Lineoptional
Visitation Numbervisitation_num

Number of visitors in a recent year

Lineoptional
Visitation Yearvisitation_year

The year in which visitors were counted

Lineoptional
Visitation Referencevisitation_ref

Reference of visitation data in <ref > </ref>

Stringoptional
Governing Bodygoverning_body

The agency or organization which controls or owns the protected area

Stringoptional
World Heritage Siteworld_heritage_site

The year the protected area was designated a World Heritage Site

Lineoptional
Urlurl

The full URL of the official website with no formatting

Stringoptional
Childchild

Yes if infobox is embedded inside another infobox

Stringoptional
Embeddedembedded

Another infobox to place within this infobox

Stringoptional

Microformat

[rætta wikitekst]

The articles created using this template include an hCard microformat. For more information read this.

Tracking categories

[rætta wikitekst]